logo
Login
/Register

SGM64A00

Active

100V Synchronous Buck DC/DC Controller with Wide Duty Cycle Range

Preview Image
Preview Image
Preview Image

The SGM64A00 is a wide input voltage range synchronous Buck controller, supporting an input voltage range of 6.5V to 100V. The minimum high-side MOSFET on-time of 40ns effectively supports low duty cycle applications. The device can be directly applied to industrial-standard 48V high-voltage DC power supply systems, enabling step-down conversion to low-voltage power rails (e.g., 5V/12V). The SGM64A00 is suitable for applications with stringent requirements on input voltage fluctuations, such as industrial power supplies and communication base stations. 

The SGM64A00 is feed-forward voltage-mode control architecture, which dynamically adjusts the ramp signal by sampling the input voltage (VIN) in real-time and generating a proportional ramp signal (VRAMP = VIN/kFF). This control architecture improves the transient response of the system to input voltage variations, simplifies the compensation network design, and delivers good dynamic performance and stability across a wide input voltage range. 

Fixed frequency pulse width modulation (FPWM) control architecture with programmable switching frequency capability spanning 100kHz to 1MHz. It incorporates an optional discontinuous conduction mode (DCM) featuring integrated valley current detection, enabling low-side MOSFET turn-off control to minimize switching losses and reverse recovery losses during light-load operation. 

The gate drive voltage is 7.5V, supporting a sink capability of 3A and a source current of 2A. An external supply can be applied to VCC to achieve higher drive voltages, supporting up to 14V for enhanced drive voltage. 

The SGM64A00 features synchronization capability, allowing the gate drive signal to synchronize with the SYNCIN clock signal, while the SYNCOUT pin outputs a clock signal with a 180° phase shift relative to the HO drive signal. This function effectively reduces input voltage ripple and minimizes EMI filter size in multi-channel or cascaded power supply applications. 

The SGM64A00 also integrates the following features: programmable soft-start, a power detection module with a power-good (PG) indicator, output voltage tracking (ensuring monotonic startup with pre-biased loads), hiccup mode over-current protection, and recoverable over-temperature protection. 

The SGM64A00 is available in a Green TQFN-3.5×4.5-20BL package and specified over a junction temperature range of -40℃ to +150℃.

More
FEATURES
  • Range of Application:
    • Input Voltage Range: 6.5V to 100V
    • Output Voltage Range: 0.8V to 60V
    • Reference Voltage: 0.8V (±1% Accuracy)
    • Fixed Switching Frequency: Adjustable, 100kHz to 1MHz
  • Drive Timing Characteristics:
    • High-side Minimum On-Time: 40ns
    • Low-side Minimum On-Time: 150ns
    • HO Turn-On Dead Time: 16ns
    • LO Turn-On Dead Time: 18ns
  • Drive Capability:
    • Gate Drive Voltage: 7.5V
    • Current Capability: 3A Sink, 2A Source
  • Control Architecture: Voltage-Mode Control with Feed-Forward Compensation
  • Power Management and Protection:
    • EN: Configurable Power-On/Off Thresholds
    • VIN UVLO: Hysteretic Under-Voltage Lockout for Input Voltage
    • VCC UVLO: Hysteretic Under-Voltage Lockout for Gate Drive Supply
  • Adjustable Soft-Start: Programmable Startup Time
  • Conduction Mode Configuration: Selectable DCM or CCM Operation
  • PGOOD: Power-Good Indicator
  • Synchronization: Support Parallel or Cascaded Operation for Phase Management
  • Current Sensing and Protection:
    • Low-side MOSFET RDSON or External Sense Resistor Current Sensing
    • Hiccup Mode Over-Current Protection
  • Over-Temperature Protection: +175°C Thermal Shutdown with Hysteresis
  • Available in a Green TQFN-3.5×4.5-20BL Package
APPLICATIONS

Test and Measurement Equipment
Wireless Infrastructure and Cloud Computing
Industrial Motor Drives
Asset Tracking and Fleet Management Systems
Inverting Buck-Boost Regulators
Non-Isolated PoE
IP Cameras
Electric Bike

Ordering Information
Part Number
StatusPackagePinsPd-Free
RoHS
REACH
Green
MSL RatingOperating Temperature RangeMaterial ContentReliability Report
Unit Resale Price*
(Volume Range: in USD)
Lead Time**
(Volume Range: Days)
SGM64A00TTVM20G/TR
Active
TQFN-3.5×4.5-20BL
20
YES
YESYESYESMSL2
-40℃ to +150℃
View
View

* The unit resale price is for reference purposes only. Please contact our distributors for a formal quotation.

** The lead time provided is for reference purposes only and is subject to change based on different circumstances.

Logo
SG Micro Corp (SGMICRO) specializes in the development, manufacturing and sales of high-performance and high-reliability integrated circuits for analog signal conditioning and system power management, offering innovative solutions to a broad range of applications in the industrial, automotive, communication, computing, consumer electronics, and medical equipment markets.
Privacy Policy
Copyright © 2025 SG MICRO CORP All rights reserved. 京公网安备11010802046258号京ICP 备08010133号-2