SGM48000

Not Recommended for New Designs

High Speed, Dual Power MOSFET Driver

SGM48000 is not recommended for new designs. The following one or more recommended part numbers listed below can serve as improved replacements.

SGM48524C

Active

Dual 5A, High-Speed, Low-Side Gate Driver with Negative Input Voltage Capability

The SGM48000/1/2 series are dual-channel low-side drivers with typical 2A source and sink current capability. Inverting and non-inverting inputs are both available and three combinations can be chosen for flexible logic application.

The rise time and fall time of SGM48000/1/2 are matched to be 12ns and 13ns respectively, which allows the pulse widths to deliver to the outputs with minimum timing errors and clock skew issues. Unique technique is integrated to achieve minimum overlap of the outputs, which reduces the dynamic switching losses.

The SGM48000/1/2 are available in Green SOIC-8 and TDFN-2×2-8L packages. They operate over an ambient temperature range of -40℃ to +125℃.

FEATURES

Improved Response Times
Matched Rise and Fall Times
Reduced Clock Skew between Dual Channels
Low Output Impedance
Output is at LOW under UVLO Protection
High Noise Immunity
Improved Clocking Rate
Low Supply Current
Wide Operating Voltage Range
-40℃ to +125℃ Operating Temperature Range
Available in Green SOIC-8 and TDFN-2×2-8L Packages

APPLICATIONS

Driving Power Devices

DC/DC Converters

Switch Mode Power Supplies

Motor Control

Class D Switching Amplifiers

Ordering Information

Part Number	Status	Package	Pins	Pd-Free	RoHS	REACH	Green	MSL Rating	Operating Temperature Range	Material Content	Reliability Report	Unit Resale Price* (Volume Range: in USD)	Lead Time** (Volume Range: Days)
SGM48000XS8G/TR	Not Recommened for New Design	SOIC-8	8	Yes	Yes	Yes	Yes	MSL3	-40℃ to +125℃	View	View
SGM48000XTDE8G/TR	Not Recommened for New Design	TDFN-2×2-8L	8	Yes	Yes	Yes	Yes	MSL1	-40℃ to +125℃	View	View

* The unit resale price is for reference purposes only. Please contact our distributors for a formal quotation.

** The lead time provided is for reference purposes only and is subject to change based on different circumstances.