SGM42636

アクティブ

45V, 1.5A Stepper Driver with Integrated Current Sense, 1/256 Microstepping and Advance Decay Mode

SGM42636.pdf

The SGM42636 is a highly integrated bipolar stepper motor driver with 7V to 45V voltage range and full-scale current of 1.5A per winding respectively. It can be used in a verity of applications including consumer, industrial, and medical equipment. The integration of power MOSFETs, current sensing, microstepping indexer, and current regulators in these devices, allows compact system design with minimal number of peripheral components.

The integrated current sensing architecture ensures high current accuracy with no need for external lossy current sense resistors.

The popular STEP/DIR/ENABLE interface is used with an indexer that is capable of up to 256 micro-steps allowing smooth and low stepping noise operation.

The current regulators can be configured in several decay modes including the conventional slow and mixed decay, and the advanced dynamic decay and ripple control modes to minimize current ripple.

Sleep mode can be used to reduce the device current to the 1µA level by pulling the nSLEEP pin to the low state.

A comprehensive set of protection features including under-voltage, short-circuit, over-current and over- temperature is supported. The nFAULT indicator output reports occurrences of the faults.

The SGM42636 is available in Green TQFN-4×4-24L, TSSOP-24 (Exposed Pad) and TSSOP-28 (Exposed Pad) packages.

特性

Fully Integrated Stepper Motor Driver
- Two H-Bridge Drivers with Power MOSFETs
- Internal Current Sensing and Regulation
Operating Supply Voltage Range: 7V to 45V
Low On-Resistance: 900mΩ HS + LS at 24V, +25℃
High Current Capacity for each Winding
- 1.5A Full-Scale, 1.1A RMS Output
Up to 1/256 Microstepping Indexer
Conventional Slow, Mixed, and Fast Decay Modes
Smart Tune Dynamic Decay Mode
Smart Tune Ripple Control Mode
PWM Chopping with Configurable Off-Time
- 7μs, 16μs, 24μs, or 32μs
Supports 1.8V, 3.3V, 5.0V Logic Input
Low Current Sleep Mode: 1μA (TYP)
Protection Features
- VM Under-Voltage Lockout (UVLO)
- Charge Pump Under-Voltage (CPUV)
- Over-Current Protection (OCP)
- Thermal Shutdown (TSD)
- Fault Condition Output (nFAULT)
Latching/Auto-Retry Options for OCP

アプリケーション

ATMs
3D/Laser Beam Printers
Stage Lighting Equipment
Multi-Function Printers/Scanners
Textile and Sewing Machines

注文書

Part Number	Status	Package	Pins	Pd-Free	RoHS	REACH	Green	MSL Rating	Operating Temperature Range	Material Content	Reliability Report
SGM42636XPTS24G/TR	アクティブ	TSSOP-24 (Exposed Pad)	24	YES	YES	YES	YES	MSL3	-40℃ to +125℃	閲覧	閲覧
SGM42636XPTS28G/TR	アクティブ	TSSOP-28 (Exposed Pad)	28	YES	YES	YES	YES	MSL3	-40℃ to +125℃	閲覧	閲覧
SGM42636XTQF24G/TR	アクティブ	TQFN-4×4-24L	24	YES	YES	YES	YES	MSL3	-40℃ to +125℃	閲覧	閲覧

* 再販価格は参考価格です。正式な見積もりについては、代理店にお問い合わせください。

** 提供されるリードタイムは参考情報であり、異なる状況に応じて変更される可能性があります。