The SGM2575 is a single load switch with reverse current protection and controlled turn-on. The device can operate from 1V to 5.5V single supply and has the ability to drive up to 2A continuous current.
The device contains a 34mΩ low RON N-MOSFET controlled by the ON pin. When the power supply is turned on for the first time, a smart pull-down resistor is used to float the ON pin until the system is stable. Once the ON pin reaches a high voltage (> VIH), the pull-down resistor is disconnected, then the standby current is very low and power loss can be reduced. The small package and low RON make the device very suitable for space limited, battery powered applications.
The device supports a wide input voltage range, which is suitable for many different voltage rails. The rise time is used to avoid inrush current. The SGM2575AD/SGM2575BD offer the quick output discharge function in disable status.
The SGM2575 is available in a Green WLCSP-0.8×0.8-4B package.
Input Voltage Range: 1V to 5.5V
Maximum Continuous Current: 2A
Low On-Resistance
RON = 34mΩ at VIN = 5V
RON = 34mΩ at VIN = 3.3V
Low Shutdown Current: 90nA (TYP)
Reverse Current Protection When Disabled
Low Threshold 1.8V GPIO Control Input
Bidirectional Power Supply for Power Zone Application
Rise Time:
SGM2575A/SGM2575AD: 60μs (TYP)
SGM2575BD: 1600μs (TYP)
Quick Output Discharge (SGM2575AD/SGM2575BD Only)
Available in a Green WLCSP-0.8×0.8-4B Package
Mobile Phone
Ultrabook
Tablet PC
Digital Camera
Wearable Technology
Solid State Drive
