Europe/EnglishChina/中文Other/English
SGM42630
Stepper Motor Driver IC
Stepper Motor Driver IC
GENERAL DESCRIPTION

The SGM42630 is a bipolar stepper motor driver suitable for automated positioning and movement control in equipment such as printers, scanners and robotic mechanisms. To control the stepper motor, two H-bridges are integrated in the device for the two motor windings along with a microstepping indexer logic. Bridge currents are regulated by chopping the motor supply voltage across the windings.

The step (STEP) and direction (DIR) inputs are provided for simple interfacing to the controller. The device also provides two microstepping input pins (USM0 and USM1) to choose the step size (full, half, quarter and eighth step).

Fast, slow and mixed (fast then slow) decay modes are selectable by applying proper voltage to DECAY input. Programmable blanking and off-time of the H-bridge PWM and selectable decay modes make the device very flexible and capable for driving a wide range of stepper motors with up to 2.6A per winding.

A number of protection features are provided in the device including under-voltage lockout, short-circuit, over-current and over-temperature shutdown.

The device is available in a Green TSSOP-28 (Exposed Pad) package.

PIN CONFIGURATIONS

1588060087297205.png

FEATURES
  • 8V to 35V Motor Power Supply Voltage Range

  • PWM with up to 2.6A Current for each Winding

  • Low On-Resistance: 0.29Ω for HS + LS, @ +25

  • Microstepping Indexer: 1, 1/2, 1/4 and 1/8

  • Step and Direction Interface

  • Programmable Decay, Blanking and Off-Time

  • Auto-Decay Mode

  • UVLO for VM, VCC, VCP, VGD Voltages

  • Over-Current Protection (OCP)

  • Thermal Shutdown (TSD)

  • Available in a Green TSSOP-28 (Exposed Pad) Package

APPLICATIONS

Robotic Mechanisms

Textile Equipment

Scanners

Positioning and Tracking

Printers

ORDERING INFORMATION
Part Number Status Package Pins Pb-Free Temp Range
SGM42630YPTS28G/TR Production TSSOP-28 (Exposed Pad) 28 Y -40℃ to +85℃ Samples