Europe/EnglishChina/中文Other/English
SGM3781
2MHz, 1.5A Flash LED Driver
2MHz, 1.5A Flash LED Driver
GENERAL DESCRIPTION

The SGM3781 is a highly integrated boost DC/DC converter with 2MHz fixed frequency. High switching frequency makes it easy to use tiny components and optimized for portable photo flash. The SGM3781 is ideal for high power flash LEDs which are suited for mobile phone camera modules and digital still cameras.

The SGM3781 offers excellent flexibility to enter flash mode and movie/torch mode through the ENF and ENM pins respectively. The maximal flash current and movie/torch current are respectively programmed through external resistors (RSETF and RSETM), which can provide simple control for the flash LED solution. When both ENF and ENM pins are driven high, the LED current is set to movie/torch current through RSETM resistor.

The D1 and D2 pins can be tied together to drive higher power single flash LEDs, sinking up to 1.5A continuous current. The integrated thermal regulation in flash mode limits the temperature of the device. It can prevent the device from triggering thermal shutdown and provide the maximum LED output current continuously.

The SGM3781 provides very low shutdown current. It also includes a comprehensive set of protection features such as over-voltage protection, LED open or short protection and thermal shutdown.

The SGM3781 is available in a Green TDFN-3×2-14L package. It operates over an ambient temperature range of -40 to +85.

PIN CONFIGURATIONS

14129104589204.png

FEATURES
  • Input Voltage Range: 3V to 5V

  • Up to Total 1.5A or Each 0.75A LED Current

  • Up to 90% Efficiency

  • Dual Flash LED Outputs

  • Tiny Inductor: 1.0μH

  • 2MHz Boost Converter

  • Separate Flash Mode Enable and Movie/Torch Mode Enable Control Pins

  • Flash Mode Diming and Movie/Torch Mode Dimming through PWM Signal

  • Independent Resistors Set Flash Current and Movie/Torch Current Respectively

  • Integrated Thermal Regulation Control

  • 330kΩ Pull-Down Resistor on ENM and ENF Pins

  • PWM Dimming Frequency Range: 10kHz to 200kHz

  • Protection Features

    Output Over-Voltage Protection

    LED Open or Short Protection

    Cycle-by-Cycle Current Limit

  • Less than 1μA Shutdown Current

  • Available in a Green TDFN-3×2-14L Package

  • Temperature Range: -40 to +85

APPLICATIONS

Portable Equipment

ORDERING INFORMATION
Part Number Status Package Pins Pb-Free Temp Range
SGM3781YTDP14G/TR Production TDFN-3×2-14L 14 Y -40℃ to +85℃ Samples