Europe/EnglishChina/中文Other/English
SGM4914
95mW, Capless, Stereo Headphone Amplifier with Shutdown
95mW, Capless, Stereo Headphone Amplifier with Shutdown
GENERAL DESCRIPTION

The SGM4914 stereo headphone amplifier is designed for portable equipment where board space is at a premium. The SGM4914 uses capless architecture to produce a ground-referenced output from a single power supply, eliminating the need for large DC-blocking capacitors for output, saving cost, board space, and component height. Additionally, for SGM4914B and SGM4914C, the gain is set internally (-2V/V or -1.5V/V), further reducing component count. For SGM4914A, the gain can be adjusted by external feedback resistors.

The SGM4914 delivers up to 95mW per channel into a 32Ω load and has low 0.01% THD+N. A -90dB power supply rejection ratio (PSRR) at 217Hz allows this device to operate from noisy digital supplies without an additional linear regulator. Comprehensive click-and-pop circuitry suppresses audible clicks and pops on startup and shutdown. Independent left/right, low-power shutdown controls make it possible to optimize power savings in mixed-mode, mono/stereo applications.

The SGM4914 operates from a single 2.7V to 5.5V supply, consumes only 5.6mA supply current, has short-circuit and thermal-overload protections, and is specified over the extended -40 to +85 temperature range. The SGM4914 is available in a Green TQFN-4×4-20L package.

PIN CONFIGURATIONS

1415945738632.png

FEATURES
  • SGM4914A: External Feedback Gain Network

    SGM4914B: Fixed -2V/V Gain

    SGM4914C: Fixed -1.5V/V Gain

  • No Bulky DC-Blocking Capacitors Required

  • Ground-Referenced Outputs Eliminate DC-Bias Voltage on Headphone Ground Pin

  • No Degradation of Low-Frequency Response Due to Output Capacitors

  • 95mW into 32Ω Load from 5V Power Supply at THD+N = 0.1% (TYP, per Channel)

  • Low 0.01% THD+N

  • High PSRR (-90dB at 217Hz)

  • Integrated Click-and-Pop Suppression

  • 2.7V to 5.5V Single Supply Operation

  • Low Quiescent Current (5.6mA at VDD = 5V)

  • Independent Left/Right, Low-Power Shutdown Controls

  • Short-Circuit and Thermal-Overload Protections

  • Undervoltage Lockout Function

  • -40 to +85 Operating Temperature Range

  • Available in a Green TQFN-4×4-20L Package

APPLICATIONS

Notebook PCs
Cellular Phones
PDAs
MP3 Players
Smart Phones
Portable Audio Equipment

ORDERING INFORMATION
Part Number Status Package Pins Pb-Free Temp Range
SGM4914AYTQI20G/TR Production TQFN-4×4-20L 20 Y -40℃ to +85℃ Samples
SGM4914BYTQI20G/TR Production TQFN-4×4-20L 20 Y -40℃ to +85℃ Samples
SGM4914CYTQI20G/TR Production TQFN-4×4-20L 20 Y -40℃ to +85℃ Samples