Europe/EnglishChina/中文Other/English
SGM41600
I2C Controlled 6A Single-Cell Switched-Capacitor Fast Charger with Bypass Mode and ADC
I2C Controlled 6A Single-Cell Switched-Capacitor Fast Charger with Bypass Mode and ADC
GENERAL DESCRIPTION

The SGM41600 is an efficient 6A switched-capacitor battery charging device with I2C control that can operate either in charge-pump voltage divider mode or in bypass mode. It can charge single-cell Li-Ion or Li-polymer battery in a wide 3.3V to 11.5V input voltage range (VBUS) from smart wall adapters or power banks. The switched-capacitor architecture is optimized for 50% duty cycle to cut the input current to one-half of the battery current and reduce the wiring drops, losses and temperature rise in the application.

A two-phase switched-capacitor topology is used to reduce the required input capacitors, improve efficiency and minimize the output ripple. Necessary protection features for safe charging performance including input over-voltage protection by external OVPFET (QOVP) and input reverse blocking (using an internal NFET) are provided.

A fast analog-to-digital converter (ADC) with 12-bit effective resolution is also included to measure die temperature, bus voltage, bus current, battery voltage and battery current (5 channels) for battery management of the charge process.

The SGM41600 is available in a Green WLCSP-2.6×2.6-36B package and can operate in the -40 to +85 ambient temperature range.

PIN CONFIGURATIONS

1657529430284956.png

FEATURES
  • Efficiency Optimized Switched-Capacitor Architecture

    Up to 6A Output Current

    3.3V to 11.5V Input Voltage Range

    200kHz to 1.5MHz Switching Frequency Setting

    Up to 97% Voltage Divider Mode Efficiency (when VBAT = 4V, IBAT = 3A)

  • Comprehensive Integrated Protection Features

    External OVP Control and Regulation

    Input Over-Voltage Protection (BUS_OVP)

    Input Short-Circuit Protection (BUS_SC)

    Input Over-Current Protection (IBUS_OCP)

    Input Under-Current Protection (IBUS_UCP)

    Battery Over-Voltage Protection (BAT_OVP)

    Output Short-Circuit Protection (VOUT_SC)

    Battery Over-Current Protection (IBAT_OCP)

    CFLY Short-Circuit Protection (CFLY_SC)

    Converter Over-Current Protection (CONV_OCP)

    Die Over-Temperature Protection (TDIE_OTP)

  • 5-Channel 12-Bit (Effective) ADC Converter

    VBUS, IBUS, VBAT, IBAT, TDIE Monitoring

APPLICATIONS

Smart Phone, Tablet PC

ORDERING INFORMATION
Part Number Status Package Pins Pb-Free Temp Range
SGM41600YG/TR Production WLCSP-2.6×2.6-36B 36 Y -40℃ to +85℃ Samples