SG Micro Corp

SGM8711 Micro-Power, RRIO, 1.8V Small Package, Push-Pull Output Comparator with Integrated Voltage Reference

GENERAL DESCRIPTION

The SGM8711 is a low power comparator with a typical power supply current of 2.2μA. It features an uncommitted on-chip voltage reference, comparator input common mode range of 200mV beyond the supply rails, and single-supply operation from 1.8V to 5.5V. The integrated 1.2V series voltage reference offers low 42μV/ drift, is stable with up to 10nF capacitive load, and can source up to 2mA (TYP) of output current.

Designed to operate over a wide range of supply voltages, from 1.8V to 5.5V, with guaranteed operation at 1.8V and 5.0V, the SGM8711 is ideal for use in a variety of battery-powered applications. With rail-to-rail input common mode voltage range, the SGM8711 is well suited for single-supply operation. Its small package makes this device ideal for use in handheld electronics and mobile phone applications.

The SGM8711 has a push-pull output stage. SGM8711 is available in Green UTDFN-1.6×1.6-6L package. It is rated over the -40 to +85 temperature range.


PIN CONFIGURATIONS

FEATURES

• Low Power Consumption:
   2.2μA (TYP) at V
S = 1.8V
• Wide Supply Voltage Range: 1.8V to 5.5V
• Push-Pull Output Current Drive:
   18mA (TYP) at V
S = 5V
• Rail-to-Rail Input
• Integrated 1.2V Voltage Reference
• -40 to +85 Operating Temperature Range
• Available in Green UTDFN-1.6×1.6-6L Package

APPLICATIONS

RC Timers
Window Detectors
IR Receiver
Alarm and Monitoring Circuits


ORDERING INFORMATION

Part Number Status Package Pins Pb-Free Temp Range
SGM8711YUDN6G/TR Production UTDFN-1.6×1.6-6L 6 Y -40℃ to +85℃ Samples

Get Samples

X
0
0
© Copyright 2007-2017 SG Micro Corp. All rights reserved. Beijing ICP Recordal No.08010133