The SGM7226 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 5.5V power supply and it can be powered directly from VBUS of USB interface.
SGM7226 is designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os.
The SGM7226 has low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480Mb/s). Each switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. Its bandwidth is wide enough to pass high-speed USB 2.0 differential signals (480Mb/s) with good signal integrity.
The SGM7226 contains special circuitry on the D+/D- pins which allows the device to withstand a VBUS short to D+ or D- when the USB devices are either powered off or powered on.
SGM7226 is available in Green TQFN-2.6×1.8-16L package. It operates over an ambient temperature range of -40℃ to +85℃.
• Supply Range: 1.8V to 5.5V
• On-Resistance: 5Ω (TYP)
• Directly Powered by VBUS
• D+/D- Short to VBUS Protection
• Fast Switching Times:
tON = 15ns (TYP)
tOFF = 20ns (TYP)
• Crosstalk: -30dB at 250MHz
• Off-Isolation: -35dB at 250MHz
• Break-Before-Make Switching
• Operating Temperature Range:
-40℃ to +85℃
• Available in Green TQFN-2.6×1.8-16L Package
Route Signals for USB 2.0
Digital Cameras and Camcorders
|Part Number||Status||Package||Pins||Pb-Free||Temp Range|
|SGM7226YTQA16G/TR||Production||TQFN-2.6×1.8-16L||16||Y||-40℃ to +85℃||Samples|