SG Micro Corp

SGM4065 Over-Voltage Protection IC and Li+ Charger Front-End Protection IC with LDO Mode

GENERAL DESCRIPTION

The SGM4065 is a charger front-end integrated circuit designed to provide protection to Li-ion batteries from failures of the charging circuitry. The IC continuously monitors the input voltage and the battery voltage. The device operates like a linear regulator, maintaining a 5.1V output with input voltages up to the input over-voltage threshold (VOVP =7.1V). During input over-voltage conditions, the IC immediately turns off the internal pass FET disconnecting the charging circuitry from the damaging input source. Additionally, if the battery voltage rises to unsafe levels while charging, power is removed from the system. The IC also monitors its die temperature and switches off if it exceeds 145. When the IC is controlled by a processor, the IC provides status information about fault conditions to the host.

The SGM4065 is available in Green TDFN-2×2-8L package and is rated over the -40 to +85 temperature range.


PIN CONFIGURATIONS


FEATURES

• Input Over-Voltage Protection
• Accurate Battery Over-Voltage Protection
• Soft-Start to Prevent Inrush Currents
• Soft-Stop to Prevent Voltage Spikes
• 18V Maximum Input Voltage
• Supports up to 1.5A Load Current
• Thermal Shutdown
• Enable Function
• Fault Status Indication
• Available in Green TDFN-2×2-8L Package

APPLICATIONS

Smart Phones, Mobile Phones
PDAs
MP3 Players
Low-Power Handheld Devices


ORDERING INFORMATION

Part Number Status Package Pins Pb-Free Temp Range
SGM4065YDE8G/TR Production TDFN-2×2-8L 8 Y -40℃ to +85℃ Samples

Get Samples

X
0
0
© Copyright 2007-2017 SG Micro Corp. All rights reserved. Beijing ICP Recordal No.08010133